 |
Submersible Drainage Pump XJ 50 - 50Hz
>Teknik Katalog ( Genel )
>XJ50 Detay Katalog
The submersible drainage pump XJ 50 with head max of 45 meters and flow max of 35 l/s, is ideal for pumping water and dirty water mixed with light abrasives. Pumps with built in AquaTronic unit will always have correct direction of impeller rotation, ensuring peak performance and reduced wear.
Main benefits
- Plug-and-pump installation
Plug in without worrying about overheating. Built-in contactor and thermal sensors protects the motor from overheating. Pumps with a built-in AquaTronic unit will electronically adjust for incorrect phase order, ensuring correct impeller rotation.
- Reliable and trouble-free operation
A double outer casing and good heat convection allows continuous operation at low water levels – or dry running – without motor damage. The pump design, robust construction and premium materials ensure high wear resistance.
- Serviceability
The modular design of the pump range saves cost by ensuring maximum pump availability with a smaller spare parts inventory. The condition of a pump with a built-in AquaTronic unit can rapidly be checked without disassembly, using its service software.
- Saves energy and the environment
The high-efficiency motor and hydraulics are combined with low friction bearings to reduce power losses. You achieve low total energy costs and minimize your carbon footprint. Environmentally safe white oil is used in the oil casing for easy inspection of seal conditions.
.
|
XJ50 Curve 50Hz |
Product information
Submersible Drainage Pump XJ 50 – 50Hz
Models
| XJ 50 ND medium head 3-phase |
| XJ 50 ND AT* medium head 3-phase |
| XJ 50 LD high flow 3-phase |
| XJ 50 LD AT* high flow3-phase |
| XJ 50 HD high head 3-phase |
| XJ 50 HD AT* high head 3-phase |
| Weight: 59 kg |
*AquaTronic: Built in electronic pump control.
Specification
Electric submersible pump
| Maximum submergence |
20 m |
| Protection class |
IP 68
|
| Max. temperature of pumped medium at max. power input and continuous duty |
40ºC
|
| Max. medium density |
1.100 kg/m3
|
| pH of the pumped medium |
5-8
|
| Strainer hole |
7.5 x 22 mm
|
| Max number of starts |
30/hour |
| Motor rating P2 |
5.6 kW |
| Speed |
2930 rpm |
| Power cable |
20 m type H07RN8-F |
Starting Method and Motor Protection
XJ 50 AT: Direct on line start (DOL 400-550 V) with built in AquaTronic unit, which automatically adjusts phase order by dual contactors, ensuring correct motor rotation.
Soft start is built in with the AquaTronic unit at 230 V, where three thyristors reduces start current to three times the nominal current. Here two relays ensure correct motor rotation. Soft start is available as option at 400 V.
The AquaTronic unit monitors motor temperature, by use of NTC thermistors built into stator windings, and stops the motor at high temperature. It will also stop the motor at high amperage or if a phase is missing.
XJ 50: Direct on line start with built in contactor. Pumps to be used with VFD or 1000 V must have terminal block instead of contactor. Thermal switches (140 ºC, ±5) built into the stator windings are connected to the contactor and stops the pump at high temperature.
Discharge Connections
3” (standard HD), 4” (standard ND), 6” (standard LD) hose connections
|
| 3”, 4”, 6" G/B.S.P. threaded connections |
|